Slide 1
Making India ATMANIRBHAR in Precision Resistors and supplying all over the world

Voltage Dividers

INTRON precision thin film SIL voltage divider are made by vacuum depositing a controlled film of NiCr on high purity alumina substrate. The resistors are formed using high resolution photolithography. The conducting traces are formed by deposited copper. The values are micro trimmed to the exact value with built in absolute and ratio tolerances. The TCR and tolerance is obtained by process capability and does not rely on a selection process. Any custom design resistor network within the manufacturing capability can be supplied.

Application :

Analog Circuits, Precision weighing scales, Calibration equipment, Testing and measuring instruments, High Precision amplifiers, Industrial Instrumentation.

Mechanical Specifications :

  • Values available : 100Ω to 100 KΩ
  • Power rating per element : 0.1 W
  • Maximum working voltage : 100 V
  • Ratio between highest and lowest value : 200
  • Absolute Tolerance : 0.1%, 0.2%, 0.5%, 1%
  • Ratio Tolerance : 0.05% (0.02% possible)
  • Absolute TCR : ± 5, 10, 25 ppm/°C
  • TCR Tracking : ± 2 ppm/°C
  • Operating Temperature Range : 0°C to +75°C
  • Insulation Resistance : 10,000MΩ
SeriesProductDescriptionResistance RangeToleranceTCR
Rated Power @70°CDatasheet
VDvoltage dividerEncapsulated Voltage Divider10Ω to 100KΩ0.05% to 1%±5 to ±250.1W Per elementAdobe-PDF-Document-icon
SVDvoltage dividerEpoxy Coated Voltage Divider100Ω to 100KΩ0.05% to 1%±5 to ±250.1W Per elementAdobe-PDF-Document-icon
EVDvoltage dividerEncapsulated High Wattage Voltage Divider 100Ω to 100KΩ0.05% to 1%±5 to ±250.25W Per elementAdobe-PDF-Document-icon

Find right component to your application

Feel free to ask any queries.