Resistor Networks and Voltage Dividers

precision resistor networkINTRON precision thin film SIL resistor networks are made by vacuum depositing a controlled film of NiCr on high purity alumina substrate. The resistors are formed using high resolution photolithography. The conducting traces are formed by deposited copper. The values are micro trimmed to the exact value with built in absolute and ratio tolerances. The TCR and tolerance is obtained by process capability and does not rely on a selection process. Any custom design resistor network within the manufacturing capability can be supplied.

Application :

Analog Circuits, Precision weighing scales, Calibration equipment, Testing and measuring instruments, High Precision amplifiers, Industrial Instrumentation.

Mechanical Specifications :

Values available : 100Ω to 100 KΩ

Power rating per element : 0.1 W

Maximum working voltage : 100 V

Ratio between highest and lowest value : 200

Absolute Tolerance : 0.1%, 0.2%, 0.5%, 1%

Ratio Tolerance : 0.05% (0.02% possible)

Absolute TCR : ± 5, 10, 25 ppm/°C

TCR Tracking : ± 2 ppm/°C

Operating Temperature Range : 0°C to +75°C

Insulation Resistance : 10,000MΩ


SeriesProductDescriptionResistance RangeToleranceTCR
Rated Power @70°CDatasheet
IToff-the-shelf resistor networkOff-the-Shelf Network100Ω to 100KΩ0.1% to 1%±2 to ±250.1W Per elementAdobe-PDF-Document-icon
CDcustom design resistor networkCustom Design100Ω to 100KΩ0.1% to 1%±5 to ±500.1W Per elementAdobe-PDF-Document-icon
IHhybrid resistor networkHybrid Network100Ω to 10MΩ0.1% to 5%±5 to ±50CustomAdobe-PDF-Document-icon
VDvoltage dividerVoltage Divider10Ω to 100KΩ0.05% to 1%±5 to ±250.1W Per elementAdobe-PDF-Document-icon
  • Precision Shunt Resistors
  • Precision Thin Film
  • Ultra Precision Foil